Are you looking for a way to spice up your front porch seating area on a budget? In this tutorial, I show you how to build an outdoor bench seat for under $40! This DIY outdoor seating idea is easier to put together than you think… This cheap bench seat, at only 12” deep, is a good option for a small porch. Having said that, I tell you how you can adjust it to meet the needs for any sized porch or patio seating area. If you are looking for DIY outdoor seating ideas, this tutorial is for you!
Make sure you subscribe to my channel (and turn the notifications on) here:
SOME OF THE TOOLS/SUPPLIES I USED-
NAIL GUN/COMPRESSOR: https://amzn.to/2XAGtIn
COMPOUND MITER SAW: https://amzn.to/2XuNazB
ELECTRIC SANDER: https://amzn.to/2RAiibt
BLACK SPRAY PAINT: https://amzn.to/2Jkx9o6
KILZ PRIMER: https://amzn.to/2LH9IH6
1: 1/2” Plywood 34”x38” (cut from a 48”x48”-save scraps for future projects) – $19
1: 2” x 12” x 8’ cut at: 34”, and 25” (2 of them) -$10
1: 1” x 2” x8’ strapping 10.5” (2), 32” (plus I used scraps in bottom corners for extra stability)- $1
2: 1” x 3” x 8’ lumber Cut to fit for batten effect as well as arm and back caps.- ($2.75 each)- $5.50
I used leftover Paint, Primer, stain, and screws/nails I had on hand.
OTHER OUTDOOR PROJECTS YOU SHOULD CHECK OUT:
COLLABS/ SPONSOR/ BUSINESS/ REAL ESTATE INQUIRIES!
Say hi on social:
DISCLOSURE: This post contains affiliate links. When you purchase an item via these links, I receive a small commission at no extra cost to you. Thank you so much for your support!
As Featured On: